Vehicle & Technical > Discovery

Rear Lights.... Access?

(1/2) > >>

Skibum346:
I don't yet have a manual for my Disco 1 and I need to check out the bulbs in the rear drivers side cluster. I have no sidelight nor brake light and I suspect they ar on the same bulb as the indicator, revers & fog lights all work.

Do I need to take apart the dickie seats and all the trim to get in?

Advice from you more experienced Disco owners would be gratefully received!

Kindest

Skibum

Bush Tucker Man:
The easiest way unless you have are a trained contortionist, or have a very biddable 7year old is to remove the seats.

It's annoying to have to do so, but only the bottom 2 pivot-bolts require removing
They're a TORX 30, or 35, then a cross-head screw for the trim-cover

Be aware the plastic nuts holding the cluster in place can be tight

Skibum346:
Thanks matey.... Guess I'll be doing some cursing tonight then...

 :cry:

Bush Tucker Man:
Oh, & don't lose the sealing gasket under the light unit, or you'll have a leak.
Put a touch of vaseline, or silicone grease on the cluster threads & run the nuts up & down a couple of times before re-installation.
They'll re-fit easier.

barmiebrumie:
Managed to get mine out with the seat's still in, but have got the scratch marks on my arms to prove it :roll: ,




John.

Navigation

[0] Message Index

[#] Next page