Vehicle & Technical > Suzuki

When Those that know, Know!

<< < (2/2)

fudge:

--- Quote from: "P.R.Howler" ---I might be able to help you with an axle, its not a Spanish one, but, I'm in FenstantonCambs so not too far from you { your avatar says near Cambs, but its just occured to me you could be anywhere near it }
--- End quote ---


Thanks for that, I am in Teversham..... and work in Peterboghorror..... I am sure the Prop Bolt holes are different! I'll make enquiries....

I was leaking tranny oil from the NS wheel hub, and upon pulling the zuke home boiled the axle, my specialist home made breather at the top of the screen looked like a chimney, I'm no expert but when the back of the car, Light board and wheel arch  are completely soaked ith oil and theres a sizzling bubbling noise and smoke..... like a BBq then I gues its knackered!

V8MoneyPit:
Can't really imagine what the axle problem is. If there is oil in there, it will lubricate the gears. If there is none, it cannot get hot!

I think it's only the very early 410's that had a different bolt pattern. Yours should be late enough to fit the more commonly available late axles.

fudge:
Yippeee...... Hey steve..... soon we'll be experts!

Spoke to Darren @ KAP and he said I only need the clutch plate cause me other bits are only 12 miles old :wink:  so thats saved some dosh.... but he's sending me a new coil too..... should sort the hot start issue.... the one on it arcs out when hot! and cause he did a deal I've promised I'll by the 2" lift Springs off him when I've sorted the clutch! and then for bigger tyres!

On the Axle... I'll sort the seal, fill it up and give it a go.....

BTW I now own another Zuke too......

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=015&item=250012965063&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

looks Cool...... May need the Axle..... Roof looks better than mine.... to be fair right now the whole car looks better than mine! :lol:

I think I'll mot the pair.... and the best one is the toy, the other gets broken and kept for parts!


Got to work out how to hide one from Amanda...... I can see it now "What do you mean there's two piles of sh*t in the front garden" "must be breeding season"

Evilgoat:
I was looking at that one this morning :)

V8MoneyPit:

--- Quote from: "fudge" ---Yippeee...... Hey steve..... soon we'll be experts!
--- End quote ---


Well, the times I've had the gearbox and transfer boxes in and out, I am getting that down to a fine art  :roll: And the first transfer box took 2 hours to strip.... the second took less than 30 minutes  :D Now, if I can only get the main dealer to come up with the parts.....

Navigation

[0] Message Index

[*] Previous page