Vehicle & Technical > Discovery

vibration problem

(1/8) > >>

denviks:
hi all. i really need some advice. i have had a vibration problem on my 200tdi disco for quite a while now. it sort of feels like its vibrating the whole truck ie you cant really feel it through the steering. i have changed the uj's on the front prop, and i have just changed the front bearing on the output shaft on the transfere box. but the vibration is still there  :evil:
oh and i have checked all levels.....and all wheels and tyres have been eliminated


any ideas what else i can check.?????

im lost now

Colin 009:
stop letting the kids jump around in the back. :wink:  :lol:  :lol:

Doodlebug:

--- Quote from: "denviks" ---hi all. i really need some advice. i have had a vibration problem on my 200tdi disco for quite a while now. it sort of feels like its vibrating the whole truck ie you cant really feel it through the steering. i have changed the uj's on the front prop, and i have just changed the front bearing on the output shaft on the transfere box. but the vibration is still there  :evil:
oh and i have checked all levels.....and all wheels and tyres have been eliminated


any ideas what else i can check.?????

im lost now
--- End quote ---


denviks wrote:
hi all. i really need some advice. i have had a vibration problem on my 200tdi disco for quite a while now. it sort of feels like its vibrating the whole truck ie you cant really feel it through the steering. i have changed the uj's on the front prop, and i have just changed the front bearing on the output shaft on the transfere box. but the vibration is still there  
oh and i have checked all levels.....and all wheels and tyres have been eliminated


any ideas what else i can check.?????

im lost now

Den, I've got a similar problem but havent eliminated the rims & tyres the disco vibrates but I also get it through the steering. I'm not sure if thats because Ive got HD steering & drag rods & have therefore removed the damper & the harmonic. Have you had your props checked for balance as this can have a dramatic effect. The UJ's can be ok but the prop can be out of balance. (shouldnt we be having this discussion somewhere else like another mutual forum!)

dazzawhipple:
Check all the ball joints, bushes etc but If you have a spare prop put that on

Mud on the inside of the rims

Darren

beast5680:
are the propshafts in phase? if i remember they need to be having the yokes at either end in the same position, we get this on agricultural stuff if the props arent aligned they can cause a vibration thats transmitted up the prop

Navigation

[0] Message Index

[#] Next page