Vehicle & Technical > Range Rover

********y Sunshine !!!!!!!!

<< < (3/3)

Garth:
The Wading plug is (lying underneath legs sticking out the front facing skywards) on the LH side of the mating face of the bell housing to engine right at the bottom. Its a Square male plug approx 13mm spanner size and there is a threaded hole next to it to store it in when not wading.  It should only be fitted when playing in water or runny mud.  If in permanently all the dust off clutch plates gathers inside bell-housing and also keeps damp in which will cause plate to stick to flywheel and also reduce life expectancy of clutch release bearing and pressure plate

Navigation

[0] Message Index

[*] Previous page