Vehicle & Technical > Discovery

P-gasket replacement?

<< < (2/5) > >>

denviks:
is the 300 series the same as the 200? if so the viscouse fan is on the water pump...so if you are changing the water pump you will need to remove the viscouse unit from the water pump before removing it  :wink:  :wink:  :wink:

jnoshea:
The fan is not on the pump in the 300Tdi, in fact it's quite far away. :wink:

denviks:
thats cool then mate........sorry for worrying you  :lol:  :lol:

Xtremeteam:
but you will however have to remove the fan to get the casing off which the P gasket is behind :wink:

you need to remove:the fan,belt,waterpump undone,alternator & pas pump,then the casing should come away leaving the block behind it with the P gasket onit

jnoshea:

--- Quote from: "RedlineMike" ---but you will however have to remove the fan to get the casing off which the P gasket is behind :wink:

you need to remove:the fan,belt,waterpump undone,alternator & pas pump,then the casing should come away leaving the block behind it with the P gasket onit
--- End quote ---


 :cry: I thought the casing that the P-gasket is behind was separate from the the timing cover and casing that is behind the fan. Is it just that you can't get to the bolts with the fan still fitted?

Navigation

[0] Message Index

[#] Next page

[*] Previous page