Vehicle & Technical > Discovery

Right this will get you or not???

<< < (2/2)

Fingers Mclean:

--- Quote from: "RedlineMike" ---what box is in it cos it should be an R380 goin by your sig,so first & reverse are on oposite sides o the change from each other
--- End quote ---

I have had to put a lt77 box in as the R380 was shot and i couldnt get a spare :?  :? So was te easiest option at the time ..just had to change the speedo on the lt77

denviks:
i have the lt77 in mine ali mate......and its the same. when i go for 1st gear i go to 2nd first and then in to 1st...... no accidently going in to reverese  :wink:

Range Rover Blues:
The 2 big coil spring you see are to make the gearstick centre sprung ie between 3rd and 4th.  SOme =boxes have bigger springs than others but that's another issue.

Reverse has a little plunger at the LHS of the selector housing which in turn operates the pushrod for the reversing light.  Is this goosed?  Do your reversing lights work? stay on all the time maybe?

There is an adjustment of the clearance to this plunger when in 1st gear that is made using shims under the housing, it allows just enough clearence without rattling.

Navigation

[0] Message Index

[*] Previous page