Vehicle & Technical > Discovery

Poly bush kits

(1/2) > >>

Ady427:
Hi there,  just wondering if anyone can help,  recently fitted a poly bush kit to my 1988 RRC,  the rangy is now being replaced by a 1995 300 Tdi Disco,  can anybody tell me if I can just swap over the p/bushed bits,  or are the radius arms panhard etc etc different.

Thanks
Ady

strapping young lad:
if you arent sure ring your supplier.

but i think they are swappable, but i THINK it depends on whether your disco has ABS or not?

Range Rover Blues:
They should all be the same, your RRC has metric radius arms and these are interchangeable with the Soft dash classic so should fit the Disco. They are not the same though.

Richie_EB4:
The front RRC radius arms a a LOT thinner than the 300 disco ones...........so you will have to modifie the bushs...38mm-45mm.

defenderdan:

--- Quote from: "Richie_EB4" ---The front RRC radius arms a a LOT thinner than the 300 disco ones...........so you will have to modifie the bushs...38mm-45mm.
--- End quote ---


The arms should still fit though because the axle bracket is still the same size. The narrower arms use wider bushes to make up the same width fitting. As your arms are already bushed there shouldn't be any mods needed. Just remember what the arms are off if you need to rebush in future. :)

Navigation

[0] Message Index

[#] Next page