Vehicle & Technical > Suzuki

Biggest tyres for a Samurai

<< < (2/3) > >>

Popeye:
A lot of it depends on how flexy your leafs are. My 205/16 diamond patteren still rub a little with 2" spring lift and a 2" body lift although I have got spacers and really flexy leafs  :D . They measure a true 29.5" bolted to the truck.

V8MoneyPit:
Mine is on 3" springs with 235/75x15's (approx. 31") but they are *really* stiff  :shock: They don't catch the arch, but would with more flex. They do, however, catch the springs on lock with 5mm spacers on them. I'll have to invest in some hugely expensive 'proper' spacers.

MK1:
If you go for 'proper' spacers then remember that the PCD is the same as Jeep CJs 5 x 5 1/2 (139mm).

There are loads to choose from if you look at the likes of...

http://www.4wd.com/newsite/default.asp

http://www.quadratec.com/

MK-90:
Cheers gents ill get him to register here and see what he says:)

Mart:
i got some spacers from eblag brand new 32mm wide with stud extenders for £42 i think the guy sells em all the time his username is RUDEWHEELMOTORS there only the cheap cast alloy kind but i've not had any problem so far[/u]

Navigation

[0] Message Index

[#] Next page

[*] Previous page