Vehicle & Technical > Defender

Worn door hinges

<< < (3/3)

vtrdaz:
can only tell you what i did - let the primer dry for a day or so , then spray the green - it covers quite well - i left an hour or so between coats - i gave it about 3 coats , then left it a day or so again before using the laquer - same again about 3 coats an hour in between - leave it to dry a day or so and then fit!
If it's original LR paint i thought it went on really easily and looked great when finished  :lol:

Ollie:

--- Quote from: "vtrdaz" ---can only tell you what i did - let the primer dry for a day or so , then spray the green - it covers quite well - i left an hour or so between coats - i gave it about 3 coats , then left it a day or so again before using the laquer - same again about 3 coats an hour in between - leave it to dry a day or so and then fit!
If it's original LR paint i thought it went on really easily and looked great when finished  :lol:
--- End quote ---


Did you rub, (fine wet and dry) the hinges down before the lacquer coat  :?:

Cheers
Ollie

vtrdaz:
no - did hear that you may have to but it looked ok as it was and was a perfect match when the laquer had gone on

Navigation

[0] Message Index

[*] Previous page