Vehicle & Technical > Defender

Propshaft

(1/3) > >>

Bob696:
Will the propshaft off a td5 disco fit my lifted 90?

PUX:

--- Quote from: "Bob696" ---Will the propshaft off a td5 disco fit my lifted 90?
--- End quote ---
should do mate the guy i bought mine off had taken it of a 90 tdi 300 all u need is a the prop and the out put flange then its happy days bob  :wink:  :D

Porny:

--- Quote ---should do mate the guy i bought mine off had taken it of a 90 tdi 300 all u need is a the prop and the out put flange then its happy days bob
--- End quote ---


But Bob's is a 200Tdi so then engine and gearbox are in a different place... approx 2" further back... so a Disco propshaft will be too short.

Bob, if you need a new prop, and want one suitable for lift try Kenson - Tel: 0121 505 3668 - they aren't that far from you in Wednesbury.  
Don't think they do a double cardon one (AFAIK), but they do a wide angle yoke jobbie which should be fine.    Being a longer front propshaft on a 200Tdi Defender, you don't usually need a double cardon affair.

If you speak to John at Kenson, you could mention my name.... but might put the price up  :wink:  :shock:



Ian

Bob696:
cheers guys ....

Kensons appears to be about 1/2 mile from where I work. May take a drive over there on the morrow

Porny:

--- Quote from: "Bob696" ---cheers guys ....

Kensons appears to be about 1/2 mile from where I work. May take a drive over there on the morrow
--- End quote ---


And John who runs it lives round the corner from me.... which is handy  :wink:

Bob, are you coming to Coney Green next weekend?


Ian

Navigation

[0] Message Index

[#] Next page