Vehicle & Technical > Series Land Rovers

oil pressure light

<< < (2/2)

hobbit:
Could be something as simple as the water shorting out the wire to the pressure switch

Fit a capilliary tube pressure gauge, one less electrical thing to go wrong :wink:

Robbo:
...right oh, now...how and where do I fit this tube thingymawatsit?....and where do I get one from....cheers...Robbo

hobbit:
You can buy a oil pressure gauge kit from most motor factors, they have electronic and capilliary units

They either replace the sender unit or with a t piece to keep the switch in line as well

The only thing you may have to buy an adaptor piece for the right threads to match up, I know on the disco 200tdi, I have just fitted one replacing the sender switch unit, and luckily the threads were right

Fitting is straight forward just follow the instructions, if you like electrics you can hook a feed in from the sidelight for illumination of the dial at night

Navigation

[0] Message Index

[*] Previous page