Vehicle & Technical > Defender

Roll cage images

(1/3) > >>

smo:
Can anyone who has a 90 (or 110) please take images of the cage inside and out please.

I'm going to have one built later this year for the 90 CSW but cannot decide on external, internal or combination of the 2 as they all have their merits. I can almost certainly rule out full internal as itll cause too many problems in the front, however a rear internal/front external may be the way to go...but without pics i canna know!!

Thanks :)

Quietsleeper:


Hope this gives you  some idea of an external rollcage ... there is one 'loop' of rollcage inside my truck where the rear door post is, (just behind the front seats) ... I can put an internal pic up if you wish.

smo:
An internal pic would be great if you could, mines a 90, but apart from length its pretty much the same!!

Is there not an internal hoop at the very back as well?

Hybrid_From_Hell:








Home made external front internal rear double cross, bar from front coonect into rear cage

Nige

Quietsleeper:

--- Quote from: "smo" ---Is there not an internal hoop at the very back as well?
--- End quote ---


Nope, there is only one internal loop where the door pillars are, because there is no external side support at that point, which is why it is bolted through floor, on the door pillars and through the roof to the external cage.

Anyhoo on to the piccies ... ( :roll: taken from all the angles I could think of) ... hope it helps :wink:  

ATB Lisa

(click on the image to enlarge it)


         

         

         

Thanks to ImageShack for Free Image Hosting

Navigation

[0] Message Index

[#] Next page