Vehicle & Technical > Discovery

cambelt question

(1/1)

Dr Neil:
can anyone tell me if there is any diferences between the 200 and 300 tdi's when it comes to changing the timing belt?
I can see you don't need to disturb the waterpump but is the timing of the engines the same and the tensioning of the belt? I have a landrover workshop manual for the 200tdi but wondered what the differences were.

thanks in advance

Neil.....

BrumLee:
300tdi is easier, but you must check to see if the modified pulley's have been fitted. Book time is about an hour less to change a 300 and you can do it without removing the radiator.

bilge rat:
youll find the tension is set slightly lower on the c/belt aswell. alan.....

nzoliver:
Howdy,

Have changed mine, but the specialist here mentioned that a pulley change was not nescesary  - only if there was an issue with the belt. He inspects the belt being taken off and if there is any sign of the belt not running 'true' then a pullet change may be required. I have done 3 now and have not had to change the pulleys on any of them.

Anyone want to comment?

 :roll:

Navigation

[0] Message Index