Vehicle & Technical > Suzuki

Transfer Box Change

<< < (2/2)

Vauxuki:
Hovis,
Be careful, as early 410 t-cases will not fit (not without major work anyway), and the flanges are not interchangable.
Im no expert on t-cases but i think its the ones with solid props that are the odd ball.

You should not need to swap the flanges over, they should be a straight swap with your 413 case, im sure its only some sammys that had different flanges.

rollazuki:
Just one tip....After fitting make sure you can still select hi/low/4x4  OK

I found that the transfer case gear levers are all bent slightly differently, and some of them would not allow the full range of movement before hitting the hole thru the tranny tunnel.

Ive got 7 tranny case levers here and they are all slightly different.

marjan:
Yep, you will need to swap the lever over from your old box to make sure you get full movement.

Navigation

[0] Message Index

[*] Previous page