Vehicle & Technical > Range Rover

suspension problem !!!

<< < (2/4) > >>

clairedave:
there is no damper fitted should there be one on a 3.9efi 1993 model as cannot see any where for it to bolt to. have fitted bigger tyres but was same on old rims, all bushs are ok and no play in panard rod, :?:

bullfrog:
It should be behind the diff ! :?:
I have an 87 so it may be different on yours . :D

Canada Al:
Sound like the nut behind the wheel to me ......Hows it going dave .....I,ve been trying to call for a couple of weeks now but I haven't had time . I will this weekend I promise . Probably when your under the thing at the end of the garden . :D .......Al

Garth:
I have the same problem mainly going round slight left hand bends at speeds over 50 mph.
I have so far:- adjusted the preload on the swivel bearings "twice"!!. First time using a spring balance as per manual and the next by using "mechanics hand" (ie till the housing starts to bind then adding thinnest shim) as per advice from local Off road supplier/garage.
Took off steering damper (looks like a small shock absorber and is definatedly behind the front diff as prevoiusly posted dont know if yours should have one though)  and checked it seemed to be OK.
Fitted polybushes
Adjusted steering box
Swapped wheels around
and finally last weekend fitted new shock absorbers as mine were leaking.
And guess what

Its still no better :x  :(  :evil:

bullfrog:
Next on your list is front prop UJ !
Worked for me  :D

Navigation

[0] Message Index

[#] Next page

[*] Previous page