Vehicle & Technical > Series Land Rovers

series security help

(1/3) > >>

mark.yellow.series.3:
ok. so my projects in its final stages of completion.
time to look at stopping little b******ds from stealing it.

there is no steering lock on mine, i am making my own wiring loom so i can make so immobisers if anyone has any suggestions.

i have fitted a luminition system, and will run the feed wires and earth wires through a isolator switch of some sort, that should stop them just putting a pos to the coil and jump starting it.

i also intend on getting a disc type steering wheel lock. and battery isolator switch.

any other suggestions.

cheers guys.

Andy the Landy:
http://www.thelandroverclub.co.uk/acatalog/Mechanical_Parts.html scroll down the page and look at 'The Big Un' I've just bought 1. Thatcham 3 approved aswell :wink:

mark.yellow.series.3:

--- Quote from: "Andy the Landy" ---http://www.thelandroverclub.co.uk/acatalog/Mechanical_Parts.html scroll down the page and look at 'The Big Un' I've just bought 1. Thatcham 3 approved aswell :wink:
--- End quote ---


thanks andy, that looks just the sort of thing i need. its a beast.

only thing is ive bought a new steering wheel that could be unbolted from the boss (6 screws), so the steering wheel could be taken off.

dew1911:
I'd say fit a proper alarm system, and if you can afford it one like Mark Evans used.

tomarse:
With your battery cut off switch - If you mount it behind the bulkhead/seat box so that it doesnt poke through it is much stealthier than mounting it normally.
So many cars have these now and they all use the same key so it wouldnt stop anybody determined.
Just drill a hole through to put the key through.

Navigation

[0] Message Index

[#] Next page