Vehicle & Technical > Defender
'NAS' Lighting
Bush Tucker Man:
Fitted the stop/tail units this morning.
I used the old-fashioned 'drill & file' method, had a scare as the bolts I bought weren't quite long enough (my own fault :oops: )
But found some that were in another box
Good grief the brake lights are bright in comparison to standard, indicators next.
mmgemini:
--- Quote from: "Bush Tucker Man" ---Fitted the stop/tail units this morning.
I used the old-fashioned 'drill & file' method, had a scare as the bolts I bought weren't quite long enough (my own fault :oops: )
But found some that were in another box
Good grief the brake lights are bright in comparison to standard, indicators next.
--- End quote ---
Never mind the brake lights being bright.The tail lights are as well.
I've actually had complaints that my tail lights are too bright......
Bush Tucker Man:
--- Quote from: "mmgemini" --- Never mind the brake lights being bright.The tail lights are as well.
I've actually had complaints that my tail lights are too bright......
--- End quote ---
I had it partially in shadow in the garage to fit them, in order to save running outside with bits 'n' pieces.
Yours are probably more 'intense' (more directional?) with the LED bulbs
I've been back & bought indicators at dinnertime as well.
Fitting was almost as quick as changing a bulb!
I used the original unit to drill pilot-holes through into the plinth & used the original screws & seal to mount the units
ProjectBlue:
I fitted NAS (think it was Bearmach or Allmakes) to the front & rear of my 110 prior to a trip across France & Spain as I thought the original 'morris' lights too small.
Never regretted it for a minute, despite cutting the bodywork up minutes after becoming the owner!
If I go back to a Defender I will almost certainly have the kit again, probably with leds this time.
It never ceases to amaze me how Landrover can produce such a physically big vehicle and rely on such tiddly lights :D
Bush Tucker Man:
Someone on another forum (not the one linked) let me know all about this 'How To' article complete with lots of details & pictures.
perhaps it might be of use to someone out there??
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version