Vehicle & Technical > Series Land Rovers

Electrics, through ignition or not

<< < (2/2)

Andy the Landy:
I had a similar problem with a live. I ended up wiring an on/off switch through the fusebox. I found that removing either fuse 1 or fuse 4 killed the live so just wired the switch between 1 and 4. Hope that helps :wink:

hobbit:

--- Quote from: "Andy the Landy" ---I had a similar problem with a live. I ended up wiring an on/off switch through the fusebox. I found that removing either fuse 1 or fuse 4 killed the live so just wired the switch between 1 and 4. Hope that helps :wink:
--- End quote ---


you got it! :wink:

CanIBeFrank:
Sorry, could you explain " ended up wiring an on/off switch through the fusebox" do you mean an actual switch?

Bit slow on the up take.

hobbit:
Your feed to the switch will be more than likely running from the fusebox, connected to a spade that is fed from the ignition switch (in the on position), some of the fuse connections are fed from a permament feed, you need to find out which connection on the back of the fuse box feeds with a permanent live and connect to that, you may have to change the fuse size though, for the extra load

Navigation

[0] Message Index

[*] Previous page