Vehicle & Technical > Discovery

TD5 electrics question

<< < (2/2)

C C:
I had the old ABS HD & TC lights problem. Ended up needing a new front hub £208 + fitting :(

hrh_dave:
been there done that and got the tshirt. one poss fix is to cable tie round the connection just to the right of the abs block. sorry I aint got no pics but this has been know to come loose and cause the fualt to appear. though it usually stays on as its one of the annoying faults that wont clear unless its on diagnostics.
p.s. you can buy just the sensors - istr that they are around 58quid I know one of the dealers in EDi keeps a stock of them on the shelf.
Dave

Disco Inferno:
DUFF WHEEL BEARINGS OR BREARINGS SHOWING SIGNS OF WEAR.

THAT WAS THE PROBLEM ON MINE,

CAUSING A THE SENSOR TO FLAG AN ERROR.

YOU CAN BUY THE WHEEL BEARINGS SEPARATELY FROM LANDROVER NOW, BUT GIVEN THE SIZE YOU WON'T BE CHANGING ONE WITHOUT A BIG PRESS.

208 QUID FOR THE HUB IS THE EASY FIX

Xtremeteam:
ever seen a caliper piston squished flat??

i have trying to get a bearing out a P38 hub (same idea as the disco 2) using a 90 ton press,didnt even moove

beast5680:
Thanks for all the suggestions on this problem i heard from the guy yesterday that he has not had the problem anymore since pushing all the plugs in the ABS loom together firmly, one in particular needed "clicking" back together, so it would seem that may have been the cause of the fuse blowing and the lights on the dash coming on :D

Navigation

[0] Message Index

[*] Previous page