Vehicle & Technical > Discovery

2" Lift help

<< < (4/4)

bullfrog:
If you are going from standard shocks then its just as easy to take them off. Do you mean you just lifted the back on the high lift ?
I hope you poped in a couple of axle stands or sleepers??

Bulli:
No just worked quick, LOL...what do you think???????
I normally suplement my axle stands with the tyre that is off...but i have a little room. I do need a bigger hilift though...5 ft aint long enough

Richie_EB4:
Nice motor Bulli..........but i agree you do need some very long axle stands.

gecko:
just did my 3" lift esey on the back not so esey on the frunt when i got my lift kit orderd some extendid brake lines  but sadly didnt turn up going to fit um next week  but i ant  taking it out till there on  defo need spring compressers to do the frunt  not a nice job dont like winding the springs down that much

bullfrog:
Very nice looking motr bud.
I fitted +3"s and 50mm blocks and did not need spring clamps ????
Just use the original bottle jck from radius arm to chassis.
On the rear its easy but you can pop the jack under the old bump stop as you will probably be changing them anyway.
I have a set of lorry axle stands but sleeper work well.
I also have 2 large chunks of wood from a boat yard.
Well handy as they are big and solid so no fear of getting squashed :shock:

Navigation

[0] Message Index

[*] Previous page