Vehicle & Technical > Defender

size!!!!!!!!!

(1/2) > >>

gecko:
hiya  im after the size of springs i would love to know the size of 3"lift springs as i dont know if i have been sent the right size also on a 90 is the spring size frunt to rear difarent like the rear ones being bigger  thanks jason

landraver:
Hi Jason
When I did mine I bought the Bearmach blue springs for a 2" lift. The front ones were shorter than the rear ones but were made of a heavier gauge, so I presume that would apply to the 3" lift aswel :?

Jeff

Ja1983:
i would expect the front ones to be heavier guage, as they have to carry the weight of the engine, the back has not much, but will probly have more travel....  although the fronts may be longer to account for the weight...

(ask supplier?)

gecko:
i got them today opend the box both same size frunt and back and dont look like 3 "lift springs  think im going to have to give them a call in the morning  thing is also dont say on the box frunt or back   :-k

defenderdan:
Some manufacturers lift by lengthening the springs and some make the spring harder to basically eliminate 3" of static sag. on that basis you won't actually know untill you fit them.

Navigation

[0] Message Index

[#] Next page