Chat & Social > The Bar - General Chat

can someone shed a bit of light plz

<< < (2/3) > >>

woody:
who would be daft enough to buy anything made by FORD  :lol:  :lol:

OH YE just realised ill get my coat :oops:  :oops:  :oops:
 

Andy the Landy:

--- Quote from: "woody" ---who would be daft enough to buy anything made by FORD  :lol:  :lol:

OH YE just realised ill get my coat :oops:  :oops:  :oops:
 
--- End quote ---
ME :lol:  :lol:

dave_2A_2.25Turbo:
The fixing is behind the triangular black plastic trim on the inside of the door., behind a bit of sponge.  either 1 x 10mm or 3 x 7mm (can't remember when it changed). Depending on where the plug is, you'll probably have to take the door trim off.  V straightforward.

mark.yellow.series.3:
F.O.R.D
fix, or, repair, daily

no offence  :wink:  :wink:

Andy the Landy:
According to Haynes.
Removal.
1. Disconnecct battery earth when electric mirror fitted.
2. Unclip quarter bezel from the front of the window opening and remove.
3. disconnect the wiring multi-plug from the mirror control switch.
4. Release the clip and detach the electrical connector to gain access to the retaining bolt.
5. Unscrew the mirror mounting bolt, then withdraw the mirror from the outside of the door. Recover the mirror seal as the wiring/cable is being drawn through the rubber grommet.

Refitting.
Refitting is a reversal of the removal procedure (but with grazed knuckles)

Navigation

[0] Message Index

[#] Next page

[*] Previous page