Vehicle & Technical > Discovery

discovery rear suspension

<< < (3/4) > >>

thumbs:
im sure paddocks site last time i looked said not for the 300 tdi, any one no why?

mm4x4 do them aswell.

can anyone comfirm paddocks fit or not, im asuming if i ring them they will say they wont, need to order some wheel bearings aswell asap.

Budgie:
I've got the Paddock's ones on my 300 TDi so unless they've changed the design in the last 6 months then they should fit.  :wink:

Wanderer:
This can happen when you've caught the tail pipe in reverse. The exhaust gets bent and pushes the pipe nearer to the A frame arms.
You might be able to undo the joint around the rear seats area and turn the rear end of the box slightly to give a bit more room. Have a look to see how level the centre box is. Mine had to be slightly raised on one side to clear everything.

Food for thought?

thumbs:
cheers wanderer that explains alot, rear box was smashed quite a few times before that c the grinder.  think the whole system will have to come off one day soon and a bit of fabrication work required.

another job for the endless list!  :D

DISCO-CHRIS:
Thumbs, i,ve got the extended bumps stops on mine fromm mm4x4 do make a difference and from memory think they were around the 8 quid mark each.
NO worries with the exhaust.....................it fell of at lunchtime today!!
now to make that side exit pipe at long last!! :wink:

Navigation

[0] Message Index

[#] Next page

[*] Previous page