Vehicle & Technical > Mitsubishi
Shogun Lift Kit
LandRoger:
Have lifted my Paj SWB 2in all round by winding out the Torsion bars 40mm and fitting 2.8LWB rear coils ,thelwb coils have a higher load rateing that gives approx 2in of lift when fitted with +2in Shocks - available from (Pro-Comp)Explorer uk,just have to trim the front bump stops by half to give a little more articulation, next is to fit 16in rims with
255/85/16 MT s, about as far as you can go without spending loadsa dosh,
(correct me if im wrong),
Mutz:
with the 2" of lift you should be able to fit 33" mt's which would give you a little extra clearance or drop to 32".
LandRoger:
Its the extra clearance under the Diff that im after- thats why im going for the 85 profile- 255/85 16s should give me nearly an extra 2in ,
think that size is only available in BFG MTs that will do me nicely, :wink:
rangerider:
ironman lift kits are available for certain paj/shoggie models.
mad geordie:
i have lifted mine put 32" bf goodridge tyres on it and tightened up the torosion bars all the way aswell as put lwb rear springs on mine ( swb) and took off the side steps and was very suprised at the height ive gained and when i off roading makes all the diffrence mate but if you want to spend mega dosh try new shocks new springs and then you will have to extend your brake pipes its not worth it to me like but how high do you wanna go and how much you gunna spend? could go on and on and on lol
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version