Vehicle & Technical > Discovery

Wheel Size - will they fit on my Disco

<< < (2/3) > >>

Range Rover Blues:
BTW the Camel cut is just the same as a factory RRC.  I've got 235/85 on the blue one and it's liftes 2", still a very snug fit.

Dave:
If you have them on land rover steel wheels, they may be in enough to clear the arch worth a try before you sell. I have 750/16 on a series 3 and there slimmer than 235/85 think it depends on tyre and tread pattern.

Wanderer:
Not without a lift they won't.

7.50 16 has the same rolling radius as a 235 85 16 give or take but they are narrower.

Kev Hobbit tried 7.50 16 on his Disco and had to a lot more than just a Camel cut with no lift.

Frankie-Boy:
I had 750x16's on my disco without a lift and only had to remove a tiny bit from the back of the arch, it took 2 seconds to do and there is no visible signs of it from outside at all, mine were Goodyear G90's on LR rims.

robbie:
I am going to try them, they are in the tyre place at the mo to make sure they hold air, otherwise they aint worth a jot anyway ;)

If they dont fit, then they'll be on here for offer. At least I will know they are airtight :)

Thanks for the advice, I will let you know if they seem OK or not. i might even take some piccies if I remember

Navigation

[0] Message Index

[#] Next page

[*] Previous page