Vehicle & Technical > Discovery

2'' LIFT

(1/2) > >>

andyhubbard:
If i do a 2'' lift what else will i have to change,on 16'' rims and everything else is standard?

beast5680:
i would do a search on the forum there are 101 answers to this depends where you want to go and how much you want to spend :lol:

Damonski:
I did ask on another thread for a nice listing of everything to do the job properly to be made up.  :wink:

colintandy:
:D the only mods required for a 2 lift would be to extend your brake lines as long as you dont drive like a maniac and appreciate that you have raised the centre of gravity of your vehicle and take it easy then all should be ok ..remember that by lifting your truck springs does not lift the axels any higher which is where your diffs are the lowest point on your truck bigger tyres will only do that on a standard disco series 1 235/70/16 is the largest with-out lift but a 235/85/16 you will get on with a 2 lift you can get bigger on but now you got to start cutting your rear arches :D what you will get is components like bushes will deteriorte quicker as they are under stress from the lift so then things start to feel a little quickey on the steering but of un-natural movements and free play in the steering are normal signs of this happining if you have a week component it will show signs very  quickley prop-shaft is ok at this lift but if you start going further then there are issues of binding and excessive vibration its fun developing he he he  :D

Bulli:
andy its a doddle, Colins right its worth doing the brake lines to be on the safe side...or move the mount plate down 2 inches

Navigation

[0] Message Index

[#] Next page