Vehicle & Technical > Discovery

Disco shocks

<< < (2/3) > >>

Xtremeteam:

--- Quote from: "Colin 009 a.k.a. Wally" ---
--- Quote from: "RedlineMike" ---the front shock bottom bushes are probably knacked so id consider changing them first & its a press out job to remove them
--- End quote ---


Whos mine or Jimbo's or both.
--- End quote ---

Any disco 2,its a common thing that goes

Colin 009:
Hah Hah, caught you out there, mines a 300 series. :wink:  :lol:

Jimbo:
Any disco 2,its a common thing that goes[/quote]

Mikee, you say it's a press out thing to change the bottom bushes - I assume that they can be butchered out (air-saw and some heat  :twisted: ), and then fit 2-piece bushes as replacements (Polybushes for example) ?

Jim

Xtremeteam:

--- Quote from: "Jimbo" ---Any disco 2,its a common thing that goes

Mikee, you say it's a press out thing to change the bottom bushes - I assume that they can be butchered out (air-saw and some heat  :twisted: ), and then fit 2-piece bushes as replacements (Polybushes for example) ?

Jim
--- End quote ---

butcher out-yes,2 piece bushes-no

to put the new ones back in i found the best way is to support in a vice & chap in with a 27mm socket,its easier than balancing in a press,

P.s it normally takes 10tons to even get the bushes to budge normally :wink:

Jimbo:
Would new shocks come with bushes already fitted, or are they extra ?

Jim

Navigation

[0] Message Index

[#] Next page

[*] Previous page