Vehicle & Technical > Discovery

Clutch setup

<< < (2/7) > >>

scorpio:
Dan it may be that it needs bleeding at the mastrer cylinder first, I would try that and then start looking for other things.

Rangie3.0LtrDan:
Ok, so i presume there is a bleed screw on the master cylinder? somewhere easy to see lol

scorpio:
depends on if you open your eyes  :lol:  :lol:  it is fairly easy find the pipe that comes out of it and have a close look I am sure you will see it

Rangie3.0LtrDan:
LOL ok, so let me get this straight so i dont [!Expletive Deleted!] it all up, i take the pipe off the master cylinder, put me own pipe on, pump the pedal and see if anything comes out, if it doesnt then i might just need a new master cylinder?

scorpio:
NOOOOOOOO!!!!!! under the pipe on the master cylinder is a bleed nipple put your bleed pipe on that and then loosen then bleedas you did the slave cylinder. and you have my number if you get stuck but I aint popping up to help  :o  :o  :lol:  :lol:

Navigation

[0] Message Index

[#] Next page

[*] Previous page