Vehicle & Technical > Discovery

Safety Devices Roof Rack

(1/3) > >>

Doodlebug:
Ive got a Safety Devices roof rack on the Disco (the Highlander low level one that follows the roof shape) & would be interested to hear from anyone else that has one as to what they did (if anything) in respect of some sort of decking on top.

I was offered Buffalo Board in 2 pieces but did not want to do this as I thought it would create too much drag at higher speeds.

I want to mount the shovel, pick, hi lift etc on it and am open to suggestions as to what to use & how people have fixed the deck before I try and come up with something.

Paul:
I boarded mine out with some plywood and fixed it down with big cable ties.

http://members.mud-club.com/profiles/Paul/gallery/SDRR

colintandy:
:D hi mine came with the chequre-plate in 2 sections one at rear and one at front it came from an ex camel trophy vehicle gonna be doin some mods to it when weather is a bit better to fix mounting points ect...for same sort kit  :D

Dave:
Just put some boards on painted with rubber paint and cut some holes out job done.
http://members.mud-club.com/profiles/dave/gallery/Rack

madmole:
Welding galvanised rebar mesh 2" spacing. Cheap. light, can walk on it and attach straps to it and the lights still comes through the sunroof. Single sheet covered whole deck. Cable ties secured it

Navigation

[0] Message Index

[#] Next page