Vehicle & Technical > Discovery

non standard radio/cd player fitment

<< < (2/4) > >>

PUX:
the sony systems are smaller usaully if all else fails i reakon ramming speed  :lol:  :lol:  :lol:

Wanderer:
You can get most makes in if you take out the console.
Fit the radio to the console and then tuck the wiring off to the side or up behind the heater controls panel.
It means the end of the CD/Radio is resting on the rubber matting but it can be pushed back and screwed back down.

Bill jones:
I have recently changed to a Pioneer CD/ Radio in my 200Tdi. It fitted in fairly easy by running the wire harness from the radio up to the passanger side of the console and sitting the ISO connector tight up into the console on top of the rear passaenger heater pipe.

seph234:
ive got my alpine cd player to fit i took the 2 screws out that hold the centre console in place, then spent a bit of time getting the wires tucked up in what space is left around it and ive got the extra leads that go to my amp and sub :D . joe

Skywalker:

--- Quote from: "jim-willy" ---Is a Landy, nowt else fits properly so why should the stereo?
--- End quote ---



Mmmmm   .......  got to agree with that Jim  :wink:

Dave

Navigation

[0] Message Index

[#] Next page

[*] Previous page