Vehicle & Technical > Discovery

Turbo Pipe / Exhaust Downpipe

(1/3) > >>

dazzawhipple:
Help

I am at work just had a phone call from SWMBO The exhaust pipe has detatched its self from the turbo (yet again But i wont tell her that!!!!! :lol: ) One of those jobs that have been put off

Can some tell me what dia clamp is needed for the turbo exhaust connection so i can nip down the local motor factors .... cant measure it i am 60 miles away

Cheers

Darren

Porny:
AFAIK...

Turbo outlet/exhaust downpipe is 2 1/2" which is 63.5mm (well it is on Defender 200Tdi)

Although different shapes (and set up) I'm sure the Disco pipe does the same as the defender one - which changes size just after the outlet from the turbo - 2 1/2" - 2"


Ian

dazzawhipple:
Cheers Ian

BTW what is AFAIK


Darren

Porny:
AFAIK = As Far As I Know  :D

i.e. I may be wrong about the size!!!


Ian

seph234:
my down pipe was always slipping down so i got some exhaust paste and took off the down pipe and put loads of paste on the manifold end put the down pipe back on and retightened the clamp i run it up to temp on the drive and touch wood it has stayed on  for the last six months.  joe

Navigation

[0] Message Index

[#] Next page