Vehicle & Technical > Discovery

300tdi auto

(1/3) > >>

hobbit:
Ok I have a 300 tdi with an auto box on the hybrid, presuming it has the right transfer box bolted onto it, what would(should) it be?

It was supposed to have come out of a 97 disco anyway

Gearbox and transfer boxes and all double dutch to me, btw, its a 4 speed auto

Les Brock:
It should be a 1.2:1 as opposed to a defender which is a 1.4:1

presumably a LT 77 but not 100% sure.....


now...... off topic your Hybrid, is it a 88 inch ? cos I want to fit an Auto to my Hybrid (200Tdi 88 inch) and want to know if it will fit ?(if I keep it that is)

if so any chance of about 1000 pictures from every angle and what box is  fiitted and prop length if possible, lot to ask I know.....please...... :P

obviously being a Hybrid it can have so many variables hence all the piccies

Ta !

if its to much hassle don't worry.... but I had to ask did'nt I ?

hobbit:
Trying to get an hour on the ramps at my mates garage with a lot of batteries and memory card :lol:

It was a rangy chassis, shortened I presume to 88 for the lightweight body on top

But its a definate mix and match of most of the Land Rovers bits and bobs (bit like a disco 1 I suppose :lol: )

Will do some pics and measurements when I get on the ramp.

TimM:

--- Quote from: "Les Brock" ---presumably a LT 77 but not 100% sure.....
--- End quote ---


The manual Disco 1's had the LT77 on the 200's and the R380 on the 300's.

Does the same logic apply to the Auto  :?:  :?

Paul:

--- Quote from: "TimM" ---
--- Quote from: "Les Brock" ---presumably a LT 77 but not 100% sure.....
--- End quote ---


The manual Disco 1's had the LT77 on the 200's and the R380 on the 300's.

Does the same logic apply to the Auto  :?:  :?
--- End quote ---


Nope it doesn't... I had a 200tdi with an R380 fitted. :wink:

Navigation

[0] Message Index

[#] Next page