Vehicle & Technical > Series Land Rovers

Fitting an electric fan?

<< < (2/2)

rustprooflandyracer:
Got a 16'' kenlowe on mine and works brilliantly, means you can remove the waste of space mechanical fan... therefore more power and warms up quicker so less noisy! Really easy to fit and U know it is a quality product so should last. Touch wood well until I go wading.

dave_2A_2.25Turbo:
Another way is to use something like a Vauxhall Frontera top hose - the fan swich screws into it. Just got to find one the right diameter.  Fronty one is about right but not tried it.  Not variable cut - in though.

MTyrrell:
I got the thermostat for mine from a chap in the US off ebay, ebay thermostat
 It came with all the kit to fit it bar the relay, the temp sender just pushes in to the radiator fins by the top hose.
 This appears to be the same thermostat that vehicle wiring products sell http://www.vehicle-wiring-products.co.uk/VWPweb2000/horns/horns.html it’s towards the bottom of the page.

I have just fitted an electric fan during the 200TDi conversion on my 110. got most the kit from eBay, I’m using a fan from a Nissan, not sure which one though. Just fits the 200TDi rad perfectly http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4593122994&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1.

hobbit:
Pretty much like the one I had off wizard, once he'd reminded me which connections i had to use it was a doddle

Sheddy:
I've got a Pacet fitted to my S3, fitted in front of the rad as the clearance behind was too tight for my liking.  A doddle to fit and I've had no problems with it.

Navigation

[0] Message Index

[*] Previous page