Vehicle & Technical > Defender

Power Steering

(1/3) > >>

Sharpshooter:
Hi, i would like to fit power steering to my 1984 110 2.5nad. What do i need and where can i get it for a reasonable price. Cheers :D  :)  :o

karloss:
You need a power steering box for starters, theres one in my scrap rangie you can have very reasonably££ !! Got a pipe or two also, possibly some other bits but I'm not sure exactly what you will need.

ninety:
I have the same motor, and the same engine - take a look here -

http://nigni.com/90

in there are pics of the pump, steering box and pipes needed.

I'm told the PS equipment came from a range rover.

Hope that helps :)

Sharpshooter:
Well i know what you have been getting up to with regard to the chassis change. I changed the bulkhead to for a 2001 model. Should last for a few years noow. Whan you said the pump goes under the alternator, you have fitted it on the other side??? Also, did you need to buy a 2 grooved crank pulley, or is there another way of doing it. All i have to do now, is find one. :D  :D

Stormin:
Try your local dismantlers for the bits you need. A friend of mine has all the parts required for sale. Bit far for you to collect though. :(

Navigation

[0] Message Index

[#] Next page