Vehicle & Technical > Discovery

2" lift essentials

<< < (5/5)

Budgie:
You can also add an attachment at the bottom of the post window, take note of the photo sizes though!!  :wink:

Did you replace the rubber seats that sit on top of the rear springs or did you leave them out, just out of interest?

For the ARBs, if you find the ball joints on the axle invert when you're off road then add some 2" spacers under the chassis mounts.
RRB has used tow ball spacers for the job, the solid ones.  :wink:

Tyke:
Rubbers went back in.

One rear arb bush found to be shot so that needs replacing asap. Might space the mount as suggested at same time.

Here's a few pics . . . .

Spooky:
I fitted a lift kit to the D2 yesterday; took five hours overall (I was on my todd, with a jack and axle stands) ...

The truck rides better now, and doesn't hit the bump stops as soon as you look at a speed bump!! :wink:

Navigation

[0] Message Index

[*] Previous page