Vehicle & Technical > Defender

Stronger CV's

(1/3) > >>

unknownmanxman:
Hi, ive finally broken a cv... and i want to put stronger ones in! Ive heard that 110 CV's are meant to be tougher! But according to paddocks there are three different cv's fitted to 110's which one is the strongest?

I have a 200tdi 90 which is 10 spline so i assume the cv joint is a 23 spline one that i have!

Thanks

muddyweb:
AEU 2522

Just beware of the relative lengths... you might need to change your stub axles and hubs too !

muddyweb:
You might also have trouble with those fancy alloys... you need the earlier drive flanges which stick out a bit further   :?

unknownmanxman:
its ok, the cv thats broken is on a different landy to the one in my avatar! Its a 1991 200tdi, and it has the thick drive flanges....

Is AEU 2522 a landrover part number? or a paddocks one?

Are the 110 cvs longer than a 90's then?

muddyweb:
That's the Land Rover part number.

The 90s and 110s of the time had the same part, mine runs on them.   The AEU2522 has a longer outer shaft than some of the later CVs, so you would need to check.

I can measure one up at work for you tomorrow if you like

Navigation

[0] Message Index

[#] Next page