Vehicle & Technical > Series Land Rovers

Brake light switch

(1/1)

dave_2A_2.25Turbo:
I need the part number for a brass brake light switch to fit the pedal box in my servo conversion.  It screws in the top.  Plunger pushed into switch = lights off, plunger out lights on.  Thought I'd found the right one from Bearmach (only down the road) but it works the opposite way round - so I know it's not  BR 1448 (575166).

Bearmach list 2 types of plastic switch - neither of which fit.  The numbers on mine are not legible. And I don't know the origin of the servo (hence posting this in both Series and Defender forums).  I did have to extend the slot in the bulkhead when I fitted the pedal-box though. Master cyl is twin-circuit type.

Help!  Difficult to drive when you have to touch wires together each time you brake!!

dave_2A_2.25Turbo:
Lucas

39*8* 21*4A

Navigation

[0] Message Index