Vehicle & Technical > Series Land Rovers
One Ton Series 3 Landy
22900013A:
It looks like a standard series III with a perkins in, and uprated back spring swing arms.
Incidentaly, the dvla website says its a 2286cc diesel. If you are buying this on the premise that its a one ton I would take care, if your just buying it as a 109, then fair enough, but I am 100% sure this is not a one ton.
Miniman:
If you get a chance would you please send me a link to the dvla part of the site which allows you to check this info...
Front hanger. Its bigger than my series 3 front hanger..?
22900013A:
Dvla site - http://www.vehiclelicence.gov.uk/EvlPortalApp/index.jsp
That spring hanger is a standard series front spring hanger mate. The one tons would have been as per the pic steel linked to in order to fit the 900x16 tyres, however by 1976 (is that right for this one, P Plate?) it would indeed have a rover axle.
The chassis, and body, would suggest its a standard series III 109.
Miniman:
Well I must add you have more Idea than me as I am new to 109's. I am just buying it because its bigger and mainly because its got a Perkins.... I love the engine. I guy I am buying it off says its a 1 Ton but I think you may be right. It has a servo fitted under the wing is that any indication as the standard diesel if I am correct did not have them fit.
22900013A:
I was gonna mention that, one tons had a LR servo mounted behind the master - yours is remote. Don't forget many people call the lwb a one ton when in reality its not.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version