Vehicle & Technical > Series Land Rovers

Series 3 Brakes seized

(1/1)

paul_g:
Just been out to take my series 3 for a spin and the brakes sieze on when you press the brake pedal. Leave it for a bit and it backs off again. Sounds like master cylinder trouble to me. Anyone had this? Is there a quick fix or is it a new master cylinder?? The brakes have never been good on this truck since i bought it a few months back!! Its a single circuit master cylinder if that help. Cheers!!

muddyweb:
Does it have a servo on it ?

It does sound like a master cylinder / servo fault to me.

paul_g:
Wait while i go misty eyed at the thought of a servo....................   No servo fitted, you can tell by the limp i have due to over developed muscles in my right leg...........

dave_2A_2.25Turbo:
If its just locking one wheel it's the wheel cylinder or shoes in that drum.  If it's all the wheels, as Tim says it's almost certainly the master cylinder.  I had this on a Jensen once - 150 miles from home on a Sunday afternoon, the front brakes would release after about 10 minutes.  I ended up clamping the hoses with 2 sets of mole grips and driving home on the rear brakes.  

 :oops:  :oops:

Navigation

[0] Message Index