Vehicle & Technical > Discovery

ARRRRRGHHHH

(1/3) > >>

PUX:
:cry: My water pump is screaming at me tried a bit of wd40 but is shuts up 4 a while then starts again checked the belts there all fine and checked the alignment thats fine too :?: so has anyone else had this and was it exspensive to sort any help apprecaited  

regards pux

Reaper:
Have you tried "belt dressing" aerosol spray?

hobbit:
Is the pump or a belt, pop the belt and have a feel round the pump itself, noist bearing, loose on the spindle etc

PUX:
im gonna go with noisy bearing everything esle seems fine  :shock:

hobbit:
If its the bearing then looks like another pump is needed. they are sealed units and not really able to get into them.

Normally the pumps start leaking though a small hole at the bottom of the bearing shaft when they are going west. have a pull on the pulley to see if/how much free play there is

Also just thining could it be the viscous coupling?

Navigation

[0] Message Index

[#] Next page