Chat & Social > The Bar - General Chat

dashboard camera mount

(1/2) > >>

the loon:
Have just bought a camera mount to go on the dash in the 90 for when I'm out and about (mainly so can video discogeordie getting stuck. I wouldnt let it lie)
Have tried clamping the mount on to dash but dash is too soft so clamp wont grip.
Any idears how I can get around this?

Picture of mount on link below

http://tinyurl.com/6jyg2

Carroll:
How about a couple of small(ish) bits of plywood or similar between the clamp and the dash? They might spread the load out enough to stop the dash distorting.

the loon:
mmm could work. Stick a piece of checker plate on the top piece to make it look the part ...
thanks will give that a go

Budgie:
Not got any ideas, unless you use something to spread the weight a bit, like thin strips of plate.  :?

I use one of these, costs a bit more but very good and will put up with all sorts of treatment off-road, will even stick to the outside of the vehicle!  :wink:



I got it from here.  :D

the loon:
bit out of my price range. good job I hadnt seen that sooner as would have been told of by SWMBO for even looking

Navigation

[0] Message Index

[#] Next page