Vehicle & Technical > Series Land Rovers

How big a job is it.

(1/5) > >>

Colin 009:
How big a job is it to swap a chassis over , i.e. old rotten one to a new galvernized one. on a series 3.

Miniman:
Its a big ish job. Body off engine out gearbox out axels off steering off. Wiring loom out of the chassis. ect ect. have you the time and space two chassis and all the body to place somewhere. I can do it at work for myself but it would take up 3 bays to do. Stuck bolts broken bolts must I say more. Not trying to put you off but its a big job to say the least.

GOOD LUCK...

Jake:
Have you got hold of a series then Colin?
 :wink:

Andy the Landy:
Can be very frustrating :evil:  I started mine back in April and have been working on average 1 to 2 days a week since then - its not quite finished yet  :evil:  :evil:  Also you need to budget for the unexpected :wink: . Costs around 60 quid just for new nuts and bolts aswell
Pics are here  :wink:

Miniman:
But at the end of the day you will have a top notch motor which will last you along time well the chassi will....

Navigation

[0] Message Index

[#] Next page