Vehicle & Technical > Freelander

Freelander Snorkel

<< < (2/3) > >>

graham bishop:
Maria,

Roca Silva who make the more astetically pleasing snorkel are asking £373 exc. shipping not sure if that is VAT or not as its comming from Spain.

You have a dirty densel don't you.  I only have petrol so I wouldn't put one on beacuse I might be inclined to go alittle to deep and knacker my car already had water up to the rubbing strips on the doors and just made it out so never again shall I be taking her that deep.

muddy pawprints:
Guess you mean Diesel? Yes, don't do petrol...........not unless I can get my hands on a Maserati or DB9  :(shades):  

Xtremeteam:

--- Quote from: "muddy pawprints" ---I like the look of that! Only read part of it, am at work have printed it off and will have a proper look tonite.
Did I read correctly thou, it came from Spain? Are they available in this country?

Want to get a new engine undertray/Sump guard as well..........once I can get the one that's on her now off!!!
Tried to change the oil and filters last week, the bolts that hold the tray inplace have siezed up, WD40 wouldn't even loosen them!! Now got to go to the garage to see if they can get it off!!!

Maria,
--- End quote ---

the belly plate is held on with diferent bolts depending on the year as landrover decided to be a runt to start with but on the later 02 onwards cars they are a doddle to remove is somewhat awkward,on 02 onwards there is 2 10mm vertically through the tray onto the x member & 4 13mm (2 each side) horizontilly through the alloy into the xmember(these get packed with crud & can be VERY tight) at the front there is 2 screws vertiacally in the centre section & 2 each side into the bumper,to the outer edge of the centres section is the 2 front 13mm bolts,

on the early cars you will need a 13mm socket & wobble to reach the front bolts as they are up inside the bumper

muddy pawprints:
Hi,
We found all the bolts, (got my Dad to help me in the end, as I could not move any of them!!) We managed to undo 1 bolt the rest are siezed. We have all the tools, (my brother used to be a mechanic). He doesn't know I've broken 2 of his "snap-on" spanners.........yet!!

Have booked the FL into my garage they are going to take the tray off, the I am going to change the oil and filter (should be interesting, LOL) :(scared):

Xtremeteam:

--- Quote from: "muddy pawprints" ---Hi,
We found all the bolts, (got my Dad to help me in the end, as I could not move any of them!!) We managed to undo 1 bolt the rest are siezed. We have all the tools, (my brother used to be a mechanic). He doesn't know I've broken 2 of his "snap-on" spanners.........yet!!

Have booked the FL into my garage they are going to take the tray off, the I am going to change the oil and filter (should be interesting, LOL) :(scared):
--- End quote ---


its ok,if its proper snap-on stuff they will be replaced under warrentry,

BTW is your freebie a td4 or the other 1?? as the filters are in  different places

Navigation

[0] Message Index

[#] Next page

[*] Previous page