Vehicle & Technical > Discovery

fitting 35" tyres on a disco

(1/4) > >>

Jake:
I've got a 1.41 ratio transfer box (to be fitted)
Still got to buy the tyres  :oops:
I will be fitted D4x4 arches and a set of lovely Mach 5's
Its already lifted 2" but i've got some 1" spacers to go on too

What else do i need to change?
Diffs?
Props?
Help please.

muddysteve:
A body lift woud be a good idea, used lots on the Zuks, doesnt screw up prop angle etc or lift the CofG but will give you more room under the arches

Steve

Jake:
How hard is body lifting a disco?
I've seen a few about but it looks like quite a big job

seph234:
35's :D i think thats about it. there is an article with the 3 disco's running 35's in land rover world from back in january o5 issue it might help a little. joe

seph234:
my body is lifted by an inch if you get the spacers made it is as simple as  lifting up putting new spacer under and refixing with longer bolts the only probs is when all the bolts are siezed solid as where mine :D

Navigation

[0] Message Index

[#] Next page