AuthorTopic: Major problem with vit  (Read 1041 times)

0 Members and 1 Guest are viewing this topic.

Offline Mule

  • Posts: 34
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Major problem with vit
« on: September 05, 2005, 19:44:22 »
Took wee beastie out for a shakdown yesterday and discoverd a major problem, the front  wheels don't drive!! The prop seems to be turned by the transfer box, it has fwh on and they are hard to turn, need pliers, where do I start looking?? :cry:

Zuki's need love too!

Offline muddyweb

  • Posts: 6382
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Major problem with vit
« Reply #1 on: September 05, 2005, 20:45:56 »
Jack the front wheels up one at a time.  With the freewheeling hubs locked, turning the wheel should turn the front propshaft.  If it doesn't, there is a good chance the hub is dead.

Failing that it could be the front diff or a driveshaft... but if the FW hubs are being a pain, that would be the most likely candidate.
Tim Burt
Muddyweb
-------------------------------------------------------------------------------------------------------------------
www.muddyweb.com
-------------------------------------------------------------------------------------------------------------------

Offline jimny gary

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Major problem with vit
« Reply #2 on: September 05, 2005, 21:02:29 »
sticking FW hubs are fairly common, wip them off, clean and regrease with light grease, should be fine.
www.4x4Recovery.com  - Sensibly priced recovery gear

Jimny, 6:1 lobster box, rear discs etc

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal