Vehicle & Technical > Military

Exhausts

(1/2) > >>

thermidorthelobster:
The 101 rear box is blowing quite a bit;  probably beyond the extent that silly putty will help.

It's not going to be an off-the-shelf item, so any recommendations as to where I can take it (Surrey/Berks/Hants border area, preferably) to get a new one?

Cheers,
David

muddyweb:
What fittings does it have on it ?  What sort of dimensions ?

Might be worth a slight re-jig and fit a more 'standard' box on there to save hassle in the future.

Plenty of suitable boxes on RR / 90 / 110 systems for not much money.

thermidorthelobster:
I'll measure up next time I see it, but what I should probably have said is that it could well be a standard box, but the pipework will be custom, I strongly suspect.  Is that bread and butter stuff to an exhaust specialist?  The only exhausts I've ever replaced before have been plug-n-play.

muddyweb:
Your local exhaust "specialist" will probably look at you as if you have 3 heads :-)

Hard to say without seeing it, but it could well be a 'bitsa'...   with sections from various vehicles.  You got any piccies ?

hobbit:
What about a pair of trucker side stacks,
or could you redirect the exhaust through the roll cage, now that would be different :wink:

One thing though if you have an exhaust specialist near you might be worth a visit, check through the custom car sites, must be one down there somewhere

Navigation

[0] Message Index

[#] Next page