Vehicle & Technical > Discovery

Wiring for spots.

<< < (5/7) > >>

ChrisW:

--- Quote from: "Andy." ---How do I find out which wire is on and which is switched off on the switches  :?:
--- End quote ---


I think the easiest way is to trace the cabling - put the switches into the 'on regardless' position then pull one of the 'feed in' connectors off the back of the switch and see if the lights turn off - course you could get the hint about the multi-meter and be able to check for voltage at the switch wire!  :wink:  :lol:

Andy.:
Well it's done.

Well not wired up until tomorrow now but all the wires are now found and labelled up ready for connecting.

A big, big thanks to all who gave advice I owe you all a beer next time I see you  :D

Pic's to follow of the new switches, hopefully by the end of the weekend  :wink:

ChrisW:
Good news on identifying everything then :wink:

Whats the update for today?

Andy.:

--- Quote from: "ChrisW70" ---Good news on identifying everything then :wink:

Whats the update for today?
--- End quote ---


Well they all work anyway and I did'nt blow anything. But and there is always a but when I have the main lights on along with the front lower fogs and then I put full beam on for the two spots on the A bar the front fogs go off.

Now I wired the A bar spots to the main beam dip wire blue/white and the front fogs to the red/blue wire. I think I need to wire the front fogs to a different wire  :?:

The update was to post some pics but have'nt stopped packing up boxes all day.

hobbit:
Fogs should work on dipped headlights only, spots on beams

Navigation

[0] Message Index

[#] Next page

[*] Previous page