Vehicle & Technical > Range Rover

lift kit question

(1/2) > >>

barmiebrumie:
hi,
   just fitted a lift kit to my truck & now the front prop is touching the gearbox xmember, have been told that there is some sort of mod to cure this that will point the diff's at a different angle - more towards the gearbox,
does this make any sense to anybody?, if so any clues?,

thanks in advance,

bb.

ps:- trying to post image but cant rember how to get it on or resize.

yipee done it at last, thanks muddywebb.

muddyweb:
Image resizer at :  http://members.mud-club.com/tools/

To add an image, use the 'Attachment' feature on the posting screen.

Littledan:
looks good barmiebrumie :D :D

Range Rover Blues:
Ok, how much lift and which gearbox/crossmember etc.  Th eproblme I hve with mine is the anti roll bar, not the gearbox crossmsmber so it's easily sorted.  The crossmeber's all come out though so you may have to resort to cutting a section out and reinforcing it elsewhere.  Remember to allow for droop travel though and watch out for your nipple getting torn off if it rubs :P

muddyweb:
As another option, you can fit the crossmember from a 90... these are the tubular type and will give you a little more clearance.

Thing is... if it is touching on tarmac, then it will only get worse as the axles start to work off-road...   I would also think you are going to have some real problems with the propshaft angles

Navigation

[0] Message Index

[#] Next page