Vehicle & Technical > Defender
Fitting disco 200tdi to defender..
turtle:
--- Quote from: "stefan" ---The fun bit will be the turbo to intercooler hoses! Any suggestions? I'm sure a 300TDi intercooler to inlet hose will do the job for the top, but not sure about the bottom hoses as the turbo outlet is fairly close to the inner wing and will need quite a sharp bend.
--- End quote ---
I have a set of old pipes of my 90 (300TDi) since I now had a Allisport intercooler fitted and replaced all the pipes with silcon ones, if there any use send me a PM, and were see if we can sort something out.
landyman Ash:
--- Quote from: "turtle" ---
I have a set of old pipes of my 90 (300TDi) since I now had a Allisport intercooler fitted and replaced all the pipes with silcon ones, if there any use send me a PM, and were see if we can sort something out.
--- End quote ---
How much difference did you find the allisport inter cooler made?
Worth the investment?
Xtremeteam:
--- Quote ---The fun bit will be the turbo to intercooler hoses! Any suggestions? I'm sure a 300TDi intercooler to inlet hose will do the job for the top, but not sure about the bottom hoses as the turbo outlet is fairly close to the inner wing and will need quite a sharp bend.
I reused the exisiting fuel lines, removed the in tank petrol pump and replaced with a normal diesel pickup, left the fuel filter in place (minus the actual filter).
--- End quote ---
the intercooler pipes are FUN,i made mine up out of 200tdi landy pipes & bits of exhaust pipe & what ever was lying around,the hardest bit is getting the pipe on the outlet of the turbo to fit as i heated the inner wing up with the oxy bottles & modded with a ball pein hammer so a 200tdi 90degree bend can be used to come forward into the 200tdi bottom pipe(metal) shortened couple of inches into the 200 sillycone hose,then for the top used to 200 hoses & a bit of exhuast pipe to go up n over the air intake
Navigation
[0] Message Index
[*] Previous page
Go to full version