Mud-club

Vehicle & Technical => Defender => Topic started by: ferret on May 27, 2007, 20:26:02

Title: defender brake disc question?
Post by: ferret on May 27, 2007, 20:26:02
Ive fitted new front discs and pads on the front of my 92 200 tdi defender 90 and i had to push the calliper pistons all the way in to get them back on the disc and i'm wondering if thats right or i have the wrong type discs ie thicker than they should be? Also they are binding a little so is that normal or will the pads bed in. So are new discs all the same thickness?

..paul
Title: defender brake disc question?
Post by: muck_truck on May 27, 2007, 22:15:29
Sounds about right having to push the pistons all the way in when you done new pads & discs.  

I had to when i did the rear ones.  Even when i did just front pads i had to push pistons in all way to get the pads to fit.

Shouldnt bind tho ?  are they just touching so when you spin the wheel you can hear them slipping against each other or are they binding so much its hard to spin the wheel ?

Check your brake fluid level, it may be a bit high now you have winded the pistons back in.
Title: defender brake disc question?
Post by: ferret on May 27, 2007, 22:29:51
I can spin the wheels but as soon as you let go they will stop allmost straight away.
SimplePortal 2.3.5 © 2008-2012, SimplePortal